戴秋莲

戴秋莲 2012-04-09

4073F?e=.jpg


个人简介:

戴秋莲,博士,教授,硕士生导师


主要任职:

教授(硕士生导师)


研究方向:

超硬材料工具技术


研究领域:

主要研究工作:超硬材料工具技术包括两大方面,一是超硬工具技术,二是加工过程的优化。

工具技术方面主要包括:

1、新型工具材料的研制

2、工具结构的改进

3、工具制造新技术(制造新方法)的研究

4、工具的改性(包括工具主要成分,添加剂种类、含量的优化等)

加工过程主要包括:

1、加工机理(锯切力大小、功率的消耗、工具的温度的高低和分布、工具磨损的原因等)

2、加工参数优化

3、被加工材料与加工工具之间的匹配性

5、加工新技术的研究


学习工作经历:

1985年7月毕业于浙江大学材料科学与工程系金属材料工程专业,获学士学位

1988年6月毕业于浙江大学材料科学与工程系金属材料及热处理专业,获工学硕士学位

1988年月至今在华侨大学机电学院任教。

1999年9月-2002年7月在华侨大学机电学院在职攻读博士学位

2002年8月-2003年6月到日本立命馆大学机械工学部做访问学者

2003年6月获得工学博士学位。


主持或参加的科研项目:

主持国家自然科学基金项目:高速精密磨削用新型高强度铸铁基CBN砂轮的研制及其性能研究,2012.1-2015.12

主持福建省自然科学基金项目“稀土对金刚石—Fe基复合材料的改性机制及应用技术”,2000.5 —2002.12

主持福建省自然科学基金项目“多孔微粉金刚石砂轮的开发研究”, 2004.5 —2006.5

参加国家自然科学基金项目,“金刚石锯片高效超窄锯缝切割石材的基础研究”,2007.1—2009.12

参加国家自然科学基金项目“高光泽度花岗石饰面高效磨削新技术的基础研究”,2003.1 —2005.12

参加福建省自然科学基金项目“钎焊金刚石串珠等磨损模型的构造与磨料固着过程控制”,2001.5—2004.4

参加福建省青年科技人才项目“花岗石高光泽度饰面高效磨削技术研究”, 2003.1—2005.12

参加国际共同研究项目“Study on theoretical development and practical establishment of advanced physical/chemical nano-machining technology”,2003.4-2006.3


主要论著与学术论文:

作者. 论著名. 期刊名, 卷(期)号, 页码


戴秋莲等,Effects of TiH2 on the Properties of Fe-based Diamond Composites,Key Engineering Materials Vols.291-292 (2005): 27-32

戴秋莲等,稀土及烧结温度对铁基胎体力学性能的影响,《稀土》2003(1): 28-32

戴秋莲等,An investigation into the effects of rare earth on the properties of Fe-based diamond composites,Key Engineering Materials, Vols.202-203 (2001):345-348

戴秋莲等,Effects of rare earth and sintering temperature on the transverse rupture strength of Fe-based diamond composites, Journal of Materials processing Technology, Vol.129 (2002):427-430

戴秋莲等,混合稀土和TiH2对金刚石工具用铁基胎体性能影响的研究,《中国工程机械学报》

Vol.2 (2004):285-289

戴秋莲等,Micro-analysis of the use of Re and TiH2 in the fabrication of iron-based diamond segments,Key Engineering Materials,Vols. 250(2003):83-88

戴秋莲等,Study of the sawing performance of diamond segments with different additives in circular sawing,Key Engineering Materials,Vols.259-260 (2003):106-111

戴秋莲等,金属结合剂对金刚石把持力的增强措施及增强机制,《材料科学与工程》2002(3):465-468

戴秋莲等,Characteristics of Granite Surface Lapped and Polished by Loose Abrasives,Proceeding of the third international conference on leading edge manufacturing in 21st century (LEM21),Vol.1 (2005): 199-204

戴秋莲等,铁基金刚石圆锯片胎体材料的研究,《金刚石与磨料磨具工程》2000(4):19-21

戴秋莲等,Study Electrochemical Mechanical Polishing Technology for Commonly Used Metal Materials,Proceeding of International Symposium on Chemical Mechanical Polishing (ISCMP),Aug. 2005: 67-72

戴秋莲等,tudy on the Dependence of Glossiness on the Micro-uneven of Natural Granite Surface,Key Engineering Materials Vols. 304-305 (2006) pp 305-309

戴秋莲等,Experimental Study on Porous Metal Bonded Diamond Grinding Wheels (II) ─ Grinding Performance of Porous Wheels,Key Engineering Materials Vols. 359-360 (2008) pp 48-52

戴秋莲等,An Investigation into the Effecting Mechanism of Alloying Additives on the Bronze Matrix and Diamond Composites,Key Engineering Materials Vol. 416 (2009) pp 455-460

戴秋莲等,Grinding Performance of Porous Diamond Wheels on different materials,Advanced Materials Research Volumes 189 – 193 (2011) pp 3191-3197

戴秋莲,Properties of Al-based Matrix and Diamond Composites Fabricated by Semi-solid Metal Processing,Advanced Materials Research Vols. 396-398 (2012) pp440-445

戴秋莲等,Comparative study about the effects of alloying additives on the compact and porous metal- bonded diamond composites,dvances in Abrasive Technology X (2007):147-153

戴秋莲等,合金化改善多孔砂轮磨削性能的研究,福州大学学报(自然科学版),(2009),No.1, 80-85


联系方式:

联系电话:15080333309

电子邮箱:lisadai@hqu.edu.cn



微信扫一扫

关注机电及自动化学院公众号